Diagnostics hub
KitchenAid Error Codes & Fault Guide
Decode KitchenAid oven F#E# codes, refrigerator faults and dishwasher codes — what each means, the part involved, and the fix.
KitchenAid built-ins run on Whirlpool-family controls, which means the ovens use the familiar F#E# fault-code format (an F number paired with an E number) and the refrigerators and dishwashers report their own fault codes and blinking-light patterns. The control monitors the oven sensor and door lock, the refrigerator's fans and defrost system, and the dishwasher's fill, drain and heat circuits, and flags a code when a reading is out of range.
Many KitchenAid oven F#E# codes are well documented and decoded precisely below (for example F2E0 for a stuck key). Some refrigerator and dishwasher indications vary by model and are described by subsystem. Each entry gives the likely cause, the part usually involved, owner-safe checks, and when a technician is needed.
Searchable reference
KitchenAid fault code lookup
All 18 documented faults
No faults match — try a different code or keyword, or ask a technician.
Local service
A KitchenAid specialist near you
Found your code but want it handled right? We repair KitchenAid across the Bay Area — flat $89 diagnostic, 365-day warranty. Popular areas:
Frequently asked
KitchenAid error code FAQ
What does F2E0 mean on a KitchenAid oven?
F2E0 means a stuck or shorted key: the control senses a keypad/touchpad button held down and locks out to protect itself. It is usually a failed keypad/membrane or the control board (ERC) misreading the keys. A power-cycle at the breaker sometimes clears a transient case; if it returns, the keypad or control board needs replacement.
What is the F#E# code format on KitchenAid ovens?
On Whirlpool-family controls (which KitchenAid uses), a fault is shown as an F code (the failure category) paired with an E code (the specific error) — for example F2E0. The F number groups the subsystem and the E number pins the detail. We decode the common combinations below and tell you when the exact pair must be confirmed against your model.
Can I clear a KitchenAid code myself?
Owner-safe steps include power-cycling at the breaker for a minute, cleaning the dishwasher filter and clearing the drain, checking the refrigerator door seal and vents, and confirming the breaker. Oven sensor, control-board and door-lock faults, and sealed-system refrigeration work, need a technician.
My KitchenAid dishwasher lights are blinking — what does that mean?
Blinking or flashing lights are KitchenAid's way of reporting a fault when there is no numeric display — the blink pattern maps to a specific error such as a drain, fill, or heating problem. The pattern is model-specific, so note exactly which lights blink and how, and we can match it to the fault.
Do I need a KitchenAid-authorized technician?
No. KitchenAid built-ins can be serviced by an experienced independent technician. We have worked on KitchenAid ovens, ranges, refrigerators and dishwashers across the Bay Area since 2005, using factory-grade parts. We are independent, not manufacturer-authorized. Diagnostic is a flat $89 and every repair has a 365-day warranty — call (650) 668-1554.
Is it safe to keep using my KitchenAid after a fault code?
An over-temperature or door-lock oven fault, or a dishwasher leak/drain fault, should stop use until checked. A single transient code that clears on a power-cycle and does not return is usually fine, but a recurring code means the underlying part should be diagnosed.
Subzero Repair · Open 24/7 · 365-day warranty
Need KitchenAid repair in the Bay Area?
Call for urgent cooling or cooking failures, or book online for a service window across the Bay Area.